|
Match
|
Document |
Document Title |
|
|
7615148 |
Seawall filter
A filter assembly for a seawall filters the flow of groundwater through a hole in the wall. The filter assembly includes: (a) a housing containing a flat flange and a perforated conical shell, the...
|
|
|
7614830 |
Pre-cast retaining wall system and method
Embodiments of retaining wall systems suitable for use as a traffic barrier for roadways include a prefabricated concrete retaining wall section and a pour-in-place footing. Another system includes...
|
|
|
7614829 |
Extendible building post
The extendible building post includes a telescoping hydraulic cylinder integrated within a construction member externally configured and dimensioned essentially identically to a conventional...
|
|
|
7614828 |
Conduit retainer apparatus
A nonconductive bridge element is secured to a pair of end plates in a conduit retainer apparatus in a trench. The pair of end plates are secured to a trench wall by dowels extending through holes...
|
|
|
7614827 |
Subsurface drip irrigation installer
A vibratory plow for installing a conduit below a ground surface. A portable vibrating compactor and a series of rollers provide a “seamless” finish to the ground.
|
|
|
7614826 |
Method and device for waterproofing and draining off infiltrated water in hydraulic structures
A sheathing of elastically deformable waterproofing sheet material ( 11 ) is applied and sealingly secured to a surface area of a hydraulic structure ( 10; 31; 36, 39 ) to be protected. The seeped...
|
|
|
7614825 |
Deployable containment system
A modular dike assembly includes strut and corner members that may be interconnected to form a barrier or dike wall surrounding a primary container. The strut members are stackable for convenience...
|
|
|
7614824 |
Control gates
A control gate is adapted to be installed across a channel for liquids. The control gate has a barrier member capable of vertical or tilting movement and it is either slidingly or pivotally mounted...
|
|
|
7614823 |
Drain board installing device without anchor plate
A drain board installing device without an anchor plate is disclosed. A drain board temporary clamp device 146 comprises a protrusion body 321 provided at the center part of an inner wall of...
|
|
|
7614822 |
Fluid distribution system
By providing an easily transported, filler component system, leaching field forming elements for establishing a series of flexible design passageways into which the desired fill material is placed,...
|
|
|
7611308 |
Panel for supporting the walls of an excavation
A panel for supporting the sidewalls of an excavation includes a plate, longitudinal members and vertical members. Each longitudinal member includes a first leg extending along the length,...
|
|
|
7611307 |
Apparatus for controlling underwater based equipment
The apparatus may include a space frame on which is mounted at least one hydrofoil for generating positive or negative lift. The frame is attachable to underwater equipment such as a turbine. The...
|
|
|
7611306 |
Leaching chamber with drain holes in base flange
A molded plastic arch shape cross section corrugated leaching chamber has opposing perforated sidewalls running up from feet. Each foot comprises a horizontal flange, an outer-edge fin, and...
|
|
|
7610962 |
Sour gas injection for use with in situ heat treatment
Systems, methods, and heaters for treating a subsurface formation are described herein. At least one method for providing acidic gas to a subsurface formation is described herein. The method may...
|
|
|
7610959 |
Methods and materials for subterranean fluid forming barriers in materials surrounding wells
Disclosed is a method and material for forming a fluid barrier in the material surrounding a wellbore. The method involves temporarily opening a fracture extending from the wellbore and then...
|
|
|
7607866 |
Drilling rig
A bolting apparatus and method for inserting a rod into a surface, the bolting apparatus including a base having a foot end and a head end, at least one stabilizing rod extendable from the base...
|
|
|
7607865 |
System and method for raising and supporting a building and connecting elongated piling sections
A system and method for supporting a building in which elongated sections, such as pilings, are connected in an end-to-end, abutting relationship.
|
|
|
7607864 |
Buoyant building foundation
An anchor system for a structure which experiences periodic buoyancy situations. The anchor system has a member connected at one end to a foundation and the other end to the buoyant structure. The...
|
|
|
7607863 |
Automated pipe-laying method and apparatus
A trench box, including a pair of oppositely disposed parallel elongated sidewalls defining a work volume, distal and proximal support members extending between the sidewalls, and a track...
|
|
|
7607862 |
Shoaling water energy conversion device
A device for converting the energy of water waves or flowing water into electrical or mechanical energy. The device includes a body or collection chamber with a hydro-turbine located opposite the...
|
|
|
7607861 |
Connection structure of plate-type vertical drain and circular horizontal drainpipe and method of constructing horizontal drain layer in soft ground using the same
A connection structure of plate type vertical drains and a circular horizontal drainpipe and a method of constructing a horizontal drain layer in soft ground using the same. The plate type vertical...
|
|
|
7604710 |
Modular floating water evaporation system
A floating water evaporation system for use in disposing of excess water from oil and gas drilling operations is provided. One or more nozzle arrays float on the surface of a wastewater pond a...
|
|
|
7604438 |
Wale and retaining wall system
The present invention relates generally to a wale for use in bracing a retaining wall. The wale is comprise of a back wall, a front wall having a channel formed therein, and a plurality of...
|
|
|
7604437 |
Method and apparatus for creating support columns using a hollow mandrel with upward flow restrictors
A system and method for installing aggregate piers is provided. A cylindrical hollow mandrel is driven to a desired depth. Aggregate is fed through the mandrel in steps. The mandrel is raised and...
|
|
|
7604436 |
Repair and reinforcement system of existing structure using reaction force of pressurizing means and method thereof
A system and method of repairing or reinforcing an existing structure using a reaction force of pressurizing means are provided. In a state in which structure supporting means, such as a steel...
|
|
|
7604435 |
Umbilical without lay up angle
Umbilical device, where the device has a longitudinal axis (x), and includes at least one elongated electrical cable or tube element; and an elongated load bearing component along the longitudinal...
|
|
|
7604301 |
Dual axis grinder blender
The dual axis grinder includes a support frame with a plate and a mast. The mast is connected to the boom of an excavator and to a hydraulic stick control cylinder. An auger tube is journaled in a...
|
|
|
7600949 |
Landscape roll layer
A landscape roll layer attaches to a three-point hitch on a tractor. The landscape roll layer cooperates with a tractor in order to apply at least one roll of a mat to a desired area. Such rolls...
|
|
|
7600948 |
Micropile retaining wall
The present invention provides a permanent earth retaining wall having small diameter casings that remain in the ground to become vertical micropile soldier beams of the retaining wall, and a...
|
|
|
7600947 |
Method for installing an arch-type underbracing on a utility pole for an overhead line by using extendable excavating unit for auger crane
A method for installing a utility pole and arch-type underbracing has developed by using an extendable excavating unit mounted on an auger crane. The method comprises two steps of excavation that:...
|
|
|
7600946 |
Mooring arrangement provided with floating mobile systems for moving booms
The inventive arrangement of motorized floating mobile systems ( 7; 107; 207 ) for moving mooring booms ( 4 A to 4 E) for boats B in inner harbors (P), to translationally move the booms ( 4 A to ...
|
|
|
7600945 |
Vacuum formed cladding
A cladding section for mounting upon an elongate member and suppressing vortex induced vibration of it, the cladding section being formed of plastics sheet shaped to define two or more parallel,...
|
|
|
7600944 |
Flood vent
The flood vent of the invention provides a frame configured for installation in a concrete block foundation wall in place of a single block. The frame includes an angularly oriented window. A gate...
|
|
|
7600583 |
Automated, low profile drilling/bolting module with collaring
A module is for use in drilling a borehole in face of a mine passage using a drilling element and installing a bolt in the borehole once formed. The module may include a bolt holder for holding a...
|
|
|
7600569 |
Method for installing and connecting a sub-sea riser
A method and a device for installing a sub-sea riser for an offshore operation, between a base installation disposed on the sea bed and a sea installation protruding above the base installation....
|
|
|
7600308 |
Method for making a drainage element
Drainage elements are made by delivering loose fill elements under gravity from a container into a sleeve of netting that is tied at one end to a pipe, or other endless element, that is passing...
|
|
|
7597811 |
Method and apparatus for subsurface oil recovery using a submersible unit
Pollutants such as hydrocarbons which have settled on the bed of a body of water are removed to the surface using a submersible vehicle positioned above the bed of a diver supported on a platform...
|
|
|
7597505 |
Roof bolt plate
A support member for supporting a roof of a subsurface space. The support member may include a base portion for defining a surface area to contact a ceiling of the subsurface space. One or more...
|
|
|
7597504 |
Blocks for modular wall construction
A block and peg combination for a modular wall construction is disclosed including a cast block of cementations material having a front face, a rear face, two sides with each side extending between...
|
|
|
7595007 |
Amino acid and carbohydrate polymers for use in soil retention, water conservation, water clarification, and dust control
Water-soluble amino acid copolymers, modified polysaccharides, acrylamide polymers, and combinations thereof, are described, for uses including flocculation of solids, particularly flocculation of...
|
|
|
7595002 |
Use of amino acid and carbohydrate polymers in soil retention, water conservation, and water clarification
Water-soluble amino acid copolymers, modified polysaccharides, acrylamide polymers, and combinations thereof are described for use in flocculation of solids, particularly flocculation of soil,...
|
|
|
7594782 |
Integral retaining foot for rammed post or pole
By attaching a formed steel plate in the shape of a tapered arrowhead with fins at each of the four corners, to the base of a post it is possible to ram a post with a integral foot that will secure...
|
|
|
7594781 |
Lift boat leg
An improved jack up vessel includes a hull, a plurality of legs, each leg having a pad, and a jacking mechanism for moving the hull upward and downward. Each leg is a generally triangular leg that...
|
|
|
7594780 |
Damping plates
A damping (or heave) plate comprises a generally flat plate attached, beneath the surface of a sea, and in horizontal orientation, to a structural member subject to being vertically moved in...
|
|
|
7594779 |
Bottom fed screened water diversion apparatus
A fish-safe screened water diversion apparatus having an input and diverted and non-diverted outputs. Water or other fluid is directed substantially downward under the screen at the input and...
|
|
|
7591612 |
Piling device
A piling device including a support frame and a footing for mounting the frame. A mechanism for gripping a pile and a mechanism for driving the pile into the ground is provided. Each of the...
|
|
|
7591611 |
Fluent material confinement system
A fluent material confinement system configured to receive a granular fluent material to form a temporary barrier structure is disclosed, wherein the fluent material confinement system includes a...
|
|
|
7591610 |
Water drain tank or channel module
A water drain tank or channel module includes a structure having a top platen and a bottom platen, a plurality of generally vertical support members for supporting at least the top platen, the...
|
|
|
7591329 |
Auger with a movable gouge for making a borehole
The invention relates to an auger for making a borehole that presents in its inside wall a groove that is substantially helical, said auger comprising: a hollow core provided with an outer helical...
|
|
|
7591328 |
Drilling and anchor setting tool
A drilling and anchor-setting tool ( 1 ) for mine, tunnel, and underground works for setting an anchor ( 5 ) in a borehole and provided with a core bit and with single-or multi-component adhesive...
|